Removing
1. Remove the engine oil pan (see above, «Oil pan - removal, gasket replacement and installation»).
2. Using a 10 mm wrench, unscrew the two bolts 1 securing the oil intake to the main bearing cap and bolt 2 securing the oil receiver to the oil pump housing.
3. Remove the oil intake, removing its tube from the oil pump channel.
Comment. The connection between the oil intake and the pump is sealed with a rubber ring.
Installation
We install the oil intake in the reverse order, after replacing the damaged or loose sealing ring.
Warning! The oil pickup bolt to the oil pump is longer than the oil pickup bolt to the main bearing cap.