Replacing control lamps and instrument cluster illumination lamps (Kalina 1118)

To replace the control lamps and instrument cluster (panel) illumination lamps on your vehicle, you will need: tweezers, a socket wrench with a 6 mm head.

1. Disconnect the wire from the negative terminal of the battery.

2. Remove the instrument cluster (see "Removal and installation the instrument cluster").



3. Turn the socket with the lamp to be replaced counterclockwise, remove it from the mounting socket and take the lamp out of the socket. 4. Install the lamp into the instrument panel in the reverse order of removal.



5. Turn the socket with the trip computer indicator backlight lamp counterclockwise and remove it from the installation hole.

6. Install the new socket with the lamp in the reverse order of removal.