For removing and installing combination (panels) appliances on the car, you will need a Phillips screwdriver.
1. Disconnect the wire from the terminal «minus» battery.
2. Turn out two screws of fastening of a guard of the panel of devices...
3.... and, overcoming the resistance of the two metal latches located in the lower corners of the shield, remove the shield from the instrument panel.
4. Turn out two screws of fastening of a combination of devices to the panel of devices and take it from a socket.
5. Rotate the instrument panel wire connector retainer...
6.... Disconnect a socket from conclusions of a combination of devices and remove a combination of devices.
7. Install a combination on the car (panel) instruments in the reverse order of removal.