Removal and installation front door electric windows (Kalina 1118)

To remove and install the electric windows of the front doors on a car, you will need: socket wrenches "8", "10".

1. Disconnect the wire from the negative terminal of the battery.

2. Remove the front door trim (see "Removal and installation the front door trim").

3. Connect the window lift switch, set the glass to a position that allows access to the nuts securing the window lift guide studs to the glass brackets...



4. …and unscrew the two nuts securing both brackets.

(Original posted on the website: «LadaMan.ru»)



5. Disconnect the front door wire harness connector and the window regulator wiring.



6. Unscrew the eleven nuts securing the window regulator to the door...





7. ...and remove the window regulator through the lower technological hole.

8. Install the window regulator on the vehicle in the reverse order. Position the power window inside the door as shown in the photo.

See also Design features of front door electric windows.