1. Remove the front and rear door sill trims (see «Removal and installation of facings of thresholds of doors»).
2. In places of an arrangement of facings of central racks of a body disconnect a sealant of doors.
3. Remove the decorative plug of the lower seat belt anchor bolt...
4.... remove the bolt...
5.... and remove it together with the bushing and spring washer.
6. Slightly wring out the bottom facing from a rack and remove it from gearing with a body rack.
Note.
The lower lining of the central pillar in the upper part is attached with two hooks made in one piece with the lining. At damage of hooks replace facing of the central rack of a body.
7. Remove the trim...
8.... unscrew the bolt of the upper fastening of the seat belt...
9.... and disconnect from the adjustment mechanism of the upper attachment point the seat belt attachment loop together with the bolt and bushing.
10. Pry off with a screwdriver and disconnect the overlay of the upper facing of the central pillar.
11. Overcoming resistance of four plastic holders, remove the top facing of the central rack of a body.
12. Establish facings of central racks of a body in an order, the return to removal. Pay attention to the condition of the plastic holders that secure the upper trim to the body pillar. Replace damaged holders with new ones.