Removal and installation the center pillar trims (Priora 2170)

You will need: a 17 mm wrench, flat-head and Phillips-head screwdrivers.



1. Using a screwdriver, remove the upper decorative trim.



2. Remove the upper belt mounting bolt…



3. …and remove the upper seat belt loop.



4. Pry it off with a screwdriver..





5. …remove the plug from the lower belt mounting bolt.



6. Remove the lower belt fastening bolt.

7. Remove the threshold trims (see "Removing and installing threshold trims").



8. Gently push the lower trim away from the pillar and disengage it from the body pillar.



9. Remove the screw securing the upper trim of the body pillar…





10. …and remove the upper trim, disengaging it from the body pillar.

11. Install the trims in the reverse order of removal.

[For more details, see the page LadaMan.ru]