Removal the rear pillar trims (Kalina 1118)

To remove the rear pillar trims you will need: flat-head and Phillips-head screwdrivers.

1. Remove the luggage compartment shelf (see "Removal and installation the luggage compartment shelf").

2. Remove the screw and the upper seat belt anchor loop (see "Replacing the rear side seat belt").



3. Remove the two screws securing the lower rear body panel mount...



4. ...pry up the trim...



Main material on the website www.Ladaman.ru



5. ...and, overcoming the resistance of the five plastic holders, remove the trim from the car.



6. Install the rear pillar trim on the vehicle in the reverse order of removal. Pay attention to the condition of the plastic holders that secure the trim to the body pillars. Replace damaged holders with new ones.