Execution sequence
1. We prepare the car for work (see «Preparing the car for maintenance and repair»). Turn off outdoor lighting.
2. In the luggage compartment, remove the plugs from the rear pillar lining.
3. Using an 8 mm socket wrench, unscrew the nut of the upper mounting of the rear light.
4. Holding the lantern from the outside, with the same key we unscrew the nut of the lower mounting of the rear lantern through the hole in the upholstery of the luggage compartment.
5. We remove the rear light from the body and remove the cartridge with the faulty lamp from the light.
6. We slightly sink the faulty lamp into the cartridge and, turning it counterclockwise, remove it from the cartridge.
7. We replace the lamp, assemble and install the taillight in reverse order.