The location of the lamps in the rear lights: A - left lamp; B - right lamp; 1 – a lamp of a signal of braking and dimensional light; 2 – a lamp of the index of turn; 3 - fog light lamp; 4 – a lamp of a light of a backing
Applicable lamps, Articles of lamps.
Operations are shown on the left side, on the right - similarly.
Open the tailgate, and unscrew the two plastic nuts securing the rear light.
Remove the lamp from the cavity in the body, as far as the wiring will allow.
After pressing the latch, disconnect the connector of the wire block from the lamp.
Remove the headlight completely.
Having pressed the three latches indicated in the photo...
Remove the back cover of the light that holds the bulb holders.
By pressing lightly on the lamp and turning it counterclockwise, remove it from the socket.
This lamp is combined and is responsible for the side light and brake light. Type - P21/5W.
When installing a new lamp, the protrusions on the lamp base must fit into the slots on the socket. Fix the lamp in the socket by turning it clockwise until it stops.
Replace the turn signal bulb in the same way (Type - PY21W) and fog lamp (Type - P21W).
There are also protrusions on the turn signal lamp that must fit into the corresponding grooves on the base.
There is also a reversing lamp in the rear right lamp.
On the reverse side of the cover on each socket, the types of lamps are indicated.
Install all parts in reverse order.