Replacing fog lights, adjusting light (Largus 1)

We remove the fog light for replacement. (catalog numbers are indicatedhere). We carry out the work on an inspection ditch or overpass. We show the operations on the left fog light, we remove the right fog light in the same way. Remove the mudguard from the front bumper on the side of the headlight being replaced.

Next, depending on what is more convenient, the mudguard can either be removed completely, or by unscrewing one front screw, bending back the edge of the mudguard and placing it behind the front support.

Disconnect the wiring harness from the fog light bulb.

Using a Phillips screwdriver, unscrew the three screws that secure the headlight to the bumper...



...and remove the headlight, taking it out of the bracket in the bumper



We install the fog light in the reverse order.





After installing the headlight, we adjust the direction of the light beam in the vertical plane.



Through the hole in the front bumper...



...using a slotted screwdriver, turn the adjusting screw clockwise to raise the beam of light, or counterclockwise to lower the beam.