Removal
Place the vehicle in the work area, apply the parking brake, and turn off the ignition. Raise the hood, disconnect the ground wire terminal from the battery (10 mm spanner).
Press the two clamps 2, Figure 7-1, and remove the housing 3 of the side turn signal with the seal assembly from the front wing of the vehicle using the device (set of adjusting mounting levers 7711238605).
Remove cartridge 1 from housing 3 of the side turn signal by turning it a quarter turn counterclockwise and pull lamp 2, Figure 7-2, towards you.
Figure 7-1 - Removing the side turn signal: 1 - lamp socket; 2 - body retainer; 3 - side turn signal housing
Figure 7-2 - Replacing the lamp: 1 - lamp socket; 2 - lamp
Installation
Install the side turn signal in the reverse order of removal.