Removal
1. Prepare the car for work (see "Preparing the car for maintenance and repair").
2. Remove the door trim (see "Door trim - removal and installation").
3. Using a slotted screwdriver, disconnect the lock rods from the handle lever 1 and the handle rod from the switch (cylinder) of the lock 2.
4. In the door niche, using an 8 mm socket wrench, unscrew the nut securing the outer door handle.
5. Using the same key, unscrew the handle mounting bolt.
6. Remove the handle from the door together with the rubber gaskets installed between the handle and the door.
Installation
We install the handle in the reverse order, replacing the damaged rubber gaskets with new ones and covering the handle mechanisms with grease such as VTB.