Removing
1. We prepare the car for work («Preparing the car for maintenance and repair»).
2. Remove the door trim («Door upholstery - removal and installation»).
3. Prying with a slotted screwdriver, disconnect the lock rod 1 from the handle lever and the rod 2 from the switch (larvae) castle.
4. In the niche of the door with an 8 mm socket wrench, unscrew the nut securing the outer door handle.
5. With a key of the same size, we unscrew the bolt securing the handle.
6. Remove the handle from the door along with the rubber gaskets installed between the handle and the door.
Installation
We install the handle in the reverse order, replacing the damaged rubber gaskets with new ones and covering the handle mechanisms with VTV type grease.