Note: When removing the door trim, there is a high probability of breaking its plastic holders, so before starting work, stock up on a sufficient number of new holders (8 pcs.).
Removal
1. Prepare the car for work ("Preparing the car for maintenance and repair").
2. Unscrew and remove the door lock button.
3. Prying with an awl (or a slotted screwdriver with a narrow, thin blade) plug, remove it.
4. Using a Phillips screwdriver, unscrew the upholstery mounting screw.
5. Using a Phillips screwdriver, unscrew the second screw securing the trim (located in the armrest niche)...
...and two screws for attaching a pocket for small items.
6. Using a slotted screwdriver, insert it between the upholstery and the door, we remove the eight upholstery holders from the door holes one by one and move the upholstery away from the door...
...(the location of the holders is shown on the removed upholstery).
7. Disconnect the two wiring harness connectors from the window lift switch unit.
Material was taken from the website (www.ladaman.ru)
8. Remove the upholstery.
9. If necessary, use a Phillips screwdriver to unscrew the three bracket mounting screws and remove it.
Installation
We install the upholstery in the reverse order, replacing the damaged holders with new ones.