Removal
1. Prepare the car for work ("Preparing the car for maintenance and repair").
2. Remove the door trim ("Door trim - removal and installation").
3. Raise the glass to the stop and fix the glass in this position (for example, with masking tape).
4. Unscrew the screw securing the inner handle of the lock and remove the inner door handle ("Door lock - removal, installation and adjustment"), we disconnect the handle from the rod.
5. Using a 10 mm socket wrench, loosen the two bolts securing the glass to each window regulator pillar.
6. Disconnect the wiring harness connector from the window lifter motor-reducer.
7. Disconnect the motor-reducer block from the holder on the door panel.
8. Using a 10 mm socket wrench, unscrew the 11 nuts securing the window regulator to the door amplifier.
9. Remove the window regulator from the door.
Installation
We install the window regulator in the reverse order, having lubricated the window regulator guide with plastic grease.