Removing
1. We prepare the car for work («Preparing the car for technical inspection and repair»).
2. Unscrew and remove the door lock button.
3. With the blade of a slotted screwdriver, we press the socket from the lining of the window handle and remove the lining (it fixes the handle on the shaft of the window regulator mechanism).
4. Remove the handle from the shaft of the window regulator mechanism.
5. Remove the handle socket.
6. With a slotted screwdriver with a thin blade, carefully pry off the decorative trim of the inner door handle.
7. Remove the pad.
8. Using a Phillips screwdriver, unscrew the two screws.
9. Remove the inner door handle.
10. With a slotted screwdriver, inserting under the upholstery, we alternately remove ten upholstery holders from the door holes and remove the upholstery from the door.
... (the location of the holders is shown on the removed upholstery).
Installation
We install the upholstery in the reverse order, replacing the damaged holders with new ones.