1. Use a thin screwdriver to press the window handle lock from the socket.
2. Slide the latch until the tab on it disengages from the socket and remove it.
3. Remove the power window handle and socket.
4. Turn out the screw of fastening of facing of the internal handle of a door.
5. Pry off the lining of the inner door handle with a screwdriver..
6.... and remove the lining.
7. Turn out two screws of fastening of the internal handle of a door.
8. Pry off the handle with a screwdriver..
9.... and remove it.
10. Turn out the button of blocking of the lock of a door.
11. Using a screwdriver, wring out the door upholstery so that the plastic holders come out of the holes in the door, and remove the upholstery.
Note. Insert the screwdriver as close as possible to the holders, otherwise the upholstery may be damaged.
Note. To avoid scratching the paint, wrap the tip of the screwdriver with electrical tape.
Note. tailgate upholstery (view from the back) fastened to the door panel with ten plastic holders. Replace damaged holders with new ones.
12. Turn out two screws of fastening of an arm of the internal handle of a door …
13.... and remove the bracket.
14. Remove the spacer for the power window mechanism axle.
15. Install the removed parts in the reverse order of removal.