Removal and installation the door opening limiter (Priora 2170)

You will need: a spanner "8", a socket wrench (head) "10".

1. Remove the front door trim (see "Removing and installing the front door trim").



2. Using a 10 mm socket wrench, unscrew the two bolts securing the limiter to the body pillar.



3. Using an 8 mm spanner, unscrew the two bolts securing the limiter to the door…



4. …and remove the limiter from the car.

5. Install the limiter in the reverse order of removal. Apply VTV-1 grease to its surface.