Front door glass replacement (Priora 2170)

You will need a 10 mm wrench.

1. Remove the front door trim (see "Removing and installing the front door trim").



2. Pry up the inner glass seal from the inside…



3. …and remove the seal.



4. Pry up the outer glass seal from the inside…



5. …and remove the seal.





6. Lower or raise the glass so that you can access the glass frame mounting bolts through the top hole in the door. Remove the two bolts securing the glass frame to the window regulator slider.



7. Remove the glass from the front door by lifting its rear part.

8. Install the glass in reverse order. When installing, make sure that the glass fits into the guides on both sides. Check how easy it is to move.