Removal and installation the outer rear door handle (Priora 2170)

You will need: a socket wrench (head) "8", a screwdriver with a flat blade.

1. Remove the rear door trim (see "Removing and installing the rear door trim").



2. Use a screwdriver to pry up and disconnect the outer handle rod end from the lock lever.



3. Unscrew the two nuts securing the outer handle.



4. Remove the handle together with the rod.





5. Disconnect the rod from the handle.

6. Install the outer handle of the lock in the reverse order, having first lubricated its rubbing parts with consistent grease.