2. Remove the front door trim (see "Front door trim - removal and installation").
3. Connect the electric window control unit to the connector and lower the door glass until the two glass mounting bolts align with the technological holes.
4. Remove the inner glass seal.
5. Using a 10 mm wrench, unscrew the bolts securing the glass to the holders.
6. Pull the glass upwards and remove it.
7. Install the parts in reverse order. Before finally tightening the glass mounting bolts, we make sure that it is installed correctly by raising and lowering the glass several times.
[Article based on information from the website: Ladaman.ru]