Replacing the front seat runners (Kalina 1118)

To replace the front seat runners on your car, you will need an 8 mm socket wrench.

1. Remove the front seat (see "Removal and installation the front seat").



2. Slide the slide to access the rear bolts securing the slide to the seat...



3. ... remove the rear and front bolts and remove the outer runners from the seat.

Attention! The front seat runners are equipped with a spring mechanism that ensures that the front seat is fixed in a given position. Take precautions when disassembling.

4. Remove the inner runners from the front seat in a similar manner.



5. Install the front seat runners onto the vehicle in reverse order. The front seat locking mechanism must be installed in the outer runners, as shown in the photo.

[Article copied from this portal www.Ladaman.ru]