Removal and installation the rear seat (Kalina 1118)

To remove and install the rear seat on a car, you will need: a flat-blade screwdriver and a 10 mm socket wrench.

Note: This work is described for the left side of the rear seat, the right side of the rear seat is removed in the same way.

1. Use a screwdriver to pry up the rear seat cushion bracket trim and remove the trim.

2. Remove the second bracket cover in the same way.



3. Unscrew the nuts securing one and the other bracket to the body...



4. ...and remove the rear seat cushion.





5. Unscrew the two nuts (shown in the photo by arrows) bracket mountings...



6. ... tilt the rear seat back forward and remove the two bolts (shown in the photo by arrows) fastening the rear seat brackets to the body.



7. Lift the rear seat back up and remove it.

8. Install the rear seat on the vehicle in the reverse order of removal.