To perform the work, an inspection ditch or overpass is required.
Comment. The mudguard is not heavy, so if necessary, work can be done without an assistant. In this case, it is more convenient to use a stand that is adjustable in height.
Execution sequence
1. We install the car on a viewing ditch or overpass (see «Preparing the car for maintenance and repair»).
2. Using a 10 mm socket wrench, we loosen the tightening of 13 bolts securing the engine mudguard.
3. Install the stand under the mudguard (or an assistant supports the mudguard).
4. Turn off the mounting bolts (when unscrewing the last bolts, the assistant supports the mudguard from falling).
5. Remove the engine mudguard.
6. Install the engine mudguard in reverse order.