Multimedia system settings (XRAY 1)

To access the multimedia system settings, on the main screen, press "Settings", then select the section at the bottom of the screen

Audio system settings

See chapter "Sound adjustment".

Screen setup

"Brightness"

You can adjust the screen brightness to your liking. You are offered three modes:

• "Low";
• "Media" (medium);
• "High"

"Map mode"

To improve the visibility of the navigation screen during the day or at night, you can change the map color settings:

• "Auto": GPS displays the map screen Switching to day/night indication mode occurs automatically when the headlights are turned on and off
• "Day": the map screen is always displayed in bright colors
• "Night": the map screen is always displayed in dark colors

"AC Info"

This function allows you to turn on/off the display of air conditioning system information when changing the settings.

"Background"

This function allows you to select the display mode in dark or light colors.

Bluetooth® Settings

See the section "Creating/deleting connections to Bluetooth® devices".

System setup

To change the time manually, click "Hours/Units" and select "Time Setting".

"Units"

This function allows you to set the units of distance measurement for the multimedia system. You can select "km" or "miles".

[Article based on information from the website LadaMan.ru]

"Factory setting"

This function allows you to reset all parameters and return to factory settings

• All: Reset all settings to factory defaults
• Phone: All settings for the phone are reset
• Navigation: All navigation settings are reset
• Audio/Media/Radio/System: Resets all audio settings, media device settings, and radio settings

"Navigation"

This function is designed to turn the navigation system on or off.

"Language"

This function allows you to change the language used in the system and the language of voice instructions.

To change the language, select the desired language and confirm your choice by clicking "OK".

"Watch"

This function allows you to select the time display format ("12h" or "24h").

Note: The time is set automatically via GPS. In this case, to get the local time, you need to have a map of the country you are in.

"System version"

This function allows you to check the system version.

System update

Using a USB flash drive and a computer connected to the Internet, you can:

• updating map content;
• system update;
• purchase of new cards;
• updating the content of points of interest

Note: In some countries, downloading and activating the Hazardous Area Warning option is illegal and may be considered an offense.

Installing software

Install Naviextras Toolbox on your computer. Toolbox software can be downloaded from the manufacturer's website.

Once you download the setup file from the website, simply double-click on it to start the installation. Follow the instructions on the screen.

Create an account

To log in, click the icon "Not logged in" on the toolbar at the top of the page or click the "Login" button on the main Toolbox screen. If you are not registered on the Naviextras com website, you can do so from the Toolbox by clicking the "Register" button on the login page.

Map update guarantee

To independently update the map data, you have a free period of no more than 90 days from the date of purchase of the car. After this period, updates become paid.

Note: The screens shown in this description may differ from the actual ones.

Registering the system with Toolbox

To register the multimedia system in your user profile, first insert a blank USB flash drive into the multimedia system's port.

Note: For the procedure to install a USB flash drive, please refer to the chapter "Navigation system" of this guide in the "Installing a USB Flash Drive" section.

The USB storage device is not included with the system.

The USB flash drive used must be in FAT32 format, with a minimum memory of 4GB and a maximum memory of 32GB.

Saving system data to a USB flash drive

After the USB stick is inserted into the USB port of the multimedia system, select "Navigation" → "Options" → "My Updates" → "Options" → "Update" on the second page.

Note: To register the system on the USB stick, start the engine and do not turn it off until the data is loaded.

The update procedure starts automatically. No actions are allowed while your system is being updated.

Once the update is complete, the multimedia system will reboot with the new settings and functionality.

Insert the USB flash drive into your computer (connected to the internet). Once your system is connected and Toolbox detects it in the list of supported systems, the system name (or software) will appear at the top of the Toolbox window.



If you have followed the instructions correctly and connected your USB key, once connected your system will be registered in your user profile.

Downloading updates to a USB key

After receiving paid or free content, you need to click the update button on the menu bar located on the left side of the Toolbox.

The Updates button displays a screen with all available updates, including:

• purchased but not yet installed items (updates or additional applications);
• free updates and additional applications added by you during installation from the catalog;
• system update (if there is a newer version available);
• free special updates

All available updates are presented as a list by region and on the planisphere.

By default, all region-related items are selected for installation. If you want to skip a certain region for a while, you need to uncheck the box at the beginning of each row of the table corresponding to the region. After reviewing the table, click the "Install" button at the bottom of the screen to begin the installation process.

The Toolbox will begin downloading and installing the selected updates. Wait for the message about the completion of the operation.

Note: Toolbox will warn you if the size of the selected items exceeds the maximum memory capacity of the multimedia system. In this case, you can select items to install on the system or remove from it so as not to exceed the memory limit.

Even after removal from the system, the elements remain your property and you can subsequently install them for free.



When updating, do not remove the USB key from the system or disconnect it.

Warning: In some countries, downloading and activating the radar alert option is illegal and may constitute an offense.

System and cartography update

Downloading updates to the vehicle system

Once the download process is complete, you can remove the USB stick from the computer. Insert the USB stick into the USB slot of the vehicle's multimedia system.

Note: To update maps, start the engine and do not turn it off until the data is downloaded.

When turned on, the system automatically detects updates available on the USB key and prompts you to update the system or map according to the updates available on the USB key. Do not turn off the multimedia system while installing the update.

Note: Downloading and installing a system update is only possible if you have a newer version of the system.

• Screen A appears automatically when you connect a USB flash drive;
• press 1 to start update;
• press 2 to return to the previous screen

The update procedure starts automatically. No actions are allowed while your system is being updated.

Note: The system may automatically reboot during the update. Wait until the radio screen turns on.

If the update procedure is interrupted accidentally, it must be repeated from the beginning.

Once the update is complete, the multimedia system will reboot with the new settings and functionality.

Malfunctions

System
Description	Reasons	Solutions
No image on screen	The screen is in sleep mode	Make sure the screen is not in sleep mode
	The system is turned off	The temperature inside the car is too high or too low
No sound	Minimum volume level or mute	Increase the volume or turn up the sound
	Incorrect system source selected	Check the selected system source and make sure the output source for it is the multimedia system
No sound from left, right, front or rear speakers	The balance or fader parameters are incorrect	Adjust the sound balance or fader correctly
Incorrect time is displayed	Automatic time setting is enabled and the system has stopped receiving a GPS signal	Continue driving until you receive a GPS signal

Multimedia device
Description	Reasons	Solutions
No sound	Minimum volume level or mute	Increase the volume or turn up the sound

Navigation
Description	Reasons	Solutions
No sound	The volume level in the Navigation menu is set to minimum or the silent mode is enabled	Increase the volume (Options in the menu "Navigation") or turn off silent mode Volume in GPS mode can be adjusted during navigation announcements
The position of the car on the screen does not correspond to its actual location	Incorrect vehicle position due to GPS reception	Drive your car until you get a good GPS signal
The display on the screen does not correspond to reality	The system version is out of date	Install the latest version of the system
Some menu sections are unavailable	In the selected mode, some menu sections are unavailable
Voice instructions are not available	The navigation system does not contain information about this intersection. Voice instructions are disabled	Increase the volume Make sure voice instructions are turned on
Voice instructions do not correspond to reality	Voice instructions may change depending on the environment	Drive your car according to real conditions
The suggested route does not start or end at the desired destination	The destination is not recognized by the system	Please indicate the road closest to your desired destination

Telephone
Description	Reasons	Solutions
No sound	Mobile phone does not connect to the system The volume level is set to minimum or silent mode is enabled	Make sure your mobile phone is turned on and connected to the system Increase the ringer volume or turn off silent mode
Unable to call	The mobile phone is not connected to the system Phone keypad lock is enabled	Make sure your mobile phone is turned on and connected to the system Unlock your phone's keypad