Navigation system settings (XRAY 1)

Warnings

The Options tab at the bottom of the Navigation menu allows you to change the way the map is displayed or your navigation options.

This section allows you to configure warnings.

Warning signal when exceeding the speed limit Maps may contain information about the maximum permissible speed values on road sections. The system can warn you when you exceed the current speed limit.

Depending on your region, this information may not be available or may only partially correspond to all roads shown on the map.

The following types of alerts are available:

• audible warning: You receive a non-verbal warning when you exceed the speed limit;
• visual warning: when the speed limit is exceeded, its current value is displayed on the map and flashes red

Click "On" or "Off" to turn the warning function on or off.

The maximum speed is always visible

Turn on or off the display of the speed limit for the section of road you are driving on by pressing "On" or "Off".

Warnings about hazardous areas

When driving through a high-security zone, a warning signal appears on the screen, accompanied by an audible signal. These danger zones correspond to sections of the road where drivers must exercise particular caution. They can be permanent or temporary. You can enable or disable this feature.

Distance at which warning is given

You can optionally select one of several distances for warning about approaching a high-risk area.

Note: In some countries, downloading and activating dangerous zones is illegal and may constitute a criminal offense.

Route settings

This function allows you to define the method of calculating routes.

Route planning

This system offers three criteria for route calculation:

• "Fast": indicates a fast route if you can travel at the speed limit on almost all roads;
• "Short": Indicates a shorter route to reduce the length of the trip;
• "Eco Mode": This mode offers a compromise between the Fast and Short modes. It offers you to reduce a certain distance by moving a little longer. The calculated route will probably be shorter than in the fast mode, but not too slow

"Auto mechanic."

You may want to avoid driving on motorways when driving a slow-speed vehicle or when towing another vehicle

"Road tax"

You can permit or prohibit the use of roads on which movement during a certain period requires the purchase of a special permit.

"Toll roads"

You can allow or prohibit the use of roads with toll plazas.

"Ferries"

You can allow or prohibit the use of all types of car ferries, ships and trains.

"Autopool"

This feature allows you to display roads that are designated for carpooling only.

"Roads without pavement"

You can allow or prohibit the use of unpaved roads.

Map settings

Coordinate format

See chapter "Map settings".

Voice settings

This feature allows you to select the language for voice guidance. See chapter "Route guidance" of this manual.

This function allows you to change the coordinate format. This system uses three formats for coordinates.

GPS

This function allows you to be informed about the position of GPS satellites.

Press "GPS" to display GPS data (screen A).

"My Updates"

This function allows you to check the dates of the last updates made.

"Movement"

This function allows you to turn on or off the "Traffic Summary", signals about various events, and also manage alternative routes in case of traffic incidents or traffic jams.

Road report

You can turn on or off the indication of alerts about various incidents on your route

This feature helps you save time by offering an alternative route if there is an incident on your route.

The multimedia system will offer to select a time, after which it will create a new route with a detour to save time.

"Event Types"

This feature allows you to select the types of events that should be displayed during navigation:

• "All events";
• "Stream of Events";
• "Overlap and block";
• "Accident";