Lighting and signaling system of car Lada XRAY 1

Headlight — removal and installation and replacement of lamps
Removal Place the vehicle in the work area, apply the parking brake, and turn off the ignition. Raise the hood, disconnect the ground wire terminal from the battery (spanner 10). Remove the front...

Fog lights — removal and installation and replacement of lamps
Removal Place the vehicle on a two-post lift (electro-hydraulic lift type P-3.2 G with a lifting capacity of 3.2 t). Turn off the ignition, lift the hood, disconnect the ground wire terminal from the...

Side direction indicator — removal and installation
Side turn signal 1, Figure 9-1, is installed in rear-view mirror 2. Light-emitting diodes are used as light sources for the side direction indicators. In case of failure of the light sources of the...

Rear outer light (on the rear wing)
Removal Place the vehicle in the work area, apply the parking brake, and turn off the ignition. Raise the hood, disconnect the ground wire terminal from the battery (spanner 10). Open the trunk lid....

Rear fog light — removal and installation
Lamp 1, Figure 11-1, rear fog lamp is installed at the bottom of the rear bumper 2 of the vehicle. Light-emitting diodes are used as light sources in the rear fog lamp. The design of the lantern is...

Additional brake light — removal and installation
Signal 1, Figure 12-1, additional braking is installed on the luggage compartment shelf behind the rear window glass. Light-emitting diodes are used as signal light sources. The design of the...

License Plate Light — removal and installation and bulb replacement
Removal Place the vehicle in the work area, apply the parking brake, and turn off the ignition. Raise the hood, disconnect the ground wire terminal from the battery (spanner 10). Figure 13-1 -...

Trunk light — removal and installation and replacement of the lamp
Removal Place the vehicle in a work area, apply the parking brake, turn off the ignition, lift the hood, and disconnect the ground wire from the battery (spanner 10). Open the trunk lid. Lamp 1,...

Glove compartment light
Removal Place the vehicle in a work area, apply the parking brake, turn off the ignition, lift the hood, and disconnect the ground wire from the battery (spanner 10). Open the glove compartment lid....

Interior light — removal and installation
Removal Place the vehicle in a work area, apply the parking brake, turn off the ignition, lift the hood, and disconnect the ground wire from the battery (spanner 10). Insert a flat-head screwdriver...

Sound signaling device — removal and installation
Removal Place the vehicle in a work area, apply the parking brake, turn off the ignition, lift the hood, and disconnect the ground wire from the battery (spanner 10). Remove the front bumper in...

This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

More sections with information from manuals for Lada:

• Electrical equipment: Lighting and signaling Lada Kalina Hatchback (2004-2013, VAZ-1119)
• Electrical equipment: Lighting and signaling Lada Granta 1 (2011-2023, VAZ-2190)
• Electrical equipment: Lighting and signaling Lada Priora 1 (2007-2018, VAZ-2170)
• Electrical equipment: Lighting and signaling Lada Vesta 1 (2015-2023, VAZ-2180)
• Electrical equipment: Lighting and signaling Lada Largus 1 (2012-2023)

Link to this section in various formats

TEXTHTMLBB Code