Repair of engine 21129, 21179 of car Lada XRAY 1

Engine — removal and installation of main systems, units and parts
General requirements Work must be carried out in accordance with the requirements of the "Intersectoral rules for labor protection in motor transport" POT RM-027-2003 and labor protection...

Powertrain — removal
Removal Place the vehicle on a two-post lift, apply the parking brake and turn off the ignition (electro-hydraulic lift type P-3.2G with a lifting capacity of 3.2 t). For vehicles with air...

itemprop="image"

Powertrain — installation
Installation Operations are common for all vehicle configurations Install the transport trolley with the engine and gearbox assembly under the vehicle (trolley type 67.50.004). Lower the vehicle to...

Auxiliary drive belt
Removal For all vehicle trim levels Place the vehicle on a two-post lift, apply the parking brake, turn off the ignition and disconnect the battery ground terminal (electro-hydraulic lift type P-3.2G...

Support roller (tensioner) of the drive belt of the mounted units
Removal For all vehicle trim levels Place the vehicle on a two-post lift, apply the parking brake, turn off the ignition and disconnect the battery ground terminal (electro-hydraulic lift type P-3.2G...

Crankshaft Damper — removal and installation
Removal For all vehicle trim levels Place the vehicle on a two-post lift, apply the parking brake, turn off the ignition and disconnect the battery ground terminal (electro-hydraulic lift type P-3.2G...

Timing belt on engines 21129, 21179
Removal Place the vehicle on a two-post lift, apply the parking brake, turn off the ignition and disconnect the battery ground terminal (electro-hydraulic lift type P-3.2G with lifting capacity of...

Engine Evaporative Canister — removal and installation
Removal Place the vehicle on a two-post lift, apply the parking brake, turn off the ignition and disconnect the battery ground terminal (electro-hydraulic lift type P-3.2G with lifting capacity of...

Exhaust system — removal and installation
Features of the device Exhaust gases are discharged from the engine through the exhaust manifold and the exhaust system, which includes a catalytic converter 1, Figure 9-1, an additional muffler 2...

Left Engine Mount — removal and installation
Removal Place the vehicle on a two-post lift, apply the parking brake and turn off the ignition (electro-hydraulic lift type P-3.2G with a lifting capacity of 3.2 t). Remove the battery in accordance...

Right engine mount support — removal and installation
Removal Place the vehicle on a work stand, apply the parking brake, turn off the ignition and disconnect the ground wire terminal from the battery (electro-hydraulic lift type P-3.2G with lifting...

Rear Engine Mount — removal and installation
Removal Place the vehicle on a two-post lift, apply the parking brake, turn off the ignition and disconnect the battery ground terminal (electro-hydraulic lift type P-3.2G with lifting capacity of...

This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

More sections with information from manuals for Lada:

• Power unit: Engine repair Lada Kalina Hatchback (2004-2013, VAZ-1119)
• Power unit: Engine repair Lada Granta 1 (2011-2023, VAZ-2190)
• Power unit: Engine repair Lada Priora 1 (2007-2018, VAZ-2170)
• Power unit: Engine repair Lada Vesta 1 (2015-2023, VAZ-2180)
• Power unit: Engine repair Lada Largus 1 (2012-2023)

Link to this section in various formats

TEXTHTMLBB Code