Interior (interior elements of the cabin) Lada XRAY 1
Seats — removal and installation
Place the vehicle in the work area. Open the hood and disconnect the ground wire terminal from the battery (spanner 10). Removing the front seat. Press lever 3, Figure 8-1, upward and move seat 2 to...
Place the vehicle in the work area. Open the hood and disconnect the ground wire terminal from the battery (spanner 10). Removing the front seat. Press lever 3, Figure 8-1, upward and move seat 2 to...
Seat belts — removal and installation
Removal the front seat belt Place the vehicle in the work area. Open the hood and disconnect the ground wire terminal from the battery (spanner 10). Figure 9-1 - Front seat belt: 1 - upper center...
Removal the front seat belt Place the vehicle in the work area. Open the hood and disconnect the ground wire terminal from the battery (spanner 10). Figure 9-1 - Front seat belt: 1 - upper center...
Interior upholstery and trims — removal and installation
Place the vehicle in the work area. Windscreen pillar trim The windshield pillar trim is secured with three plastic clips. To dismantle the cladding, it is necessary to remove the doorway seal in the...
Place the vehicle in the work area. Windscreen pillar trim The windshield pillar trim is secured with three plastic clips. To dismantle the cladding, it is necessary to remove the doorway seal in the...
Cabin filter — removal and installation
The cabin filter is installed in the housing of the heating, air conditioning and ventilation unit on the front passenger side. The heating, air conditioning and ventilation system unit itself is...
The cabin filter is installed in the housing of the heating, air conditioning and ventilation unit on the front passenger side. The heating, air conditioning and ventilation system unit itself is...
Heating, ventilation and air conditioning system unit
Place the vehicle in the work area. Open the hood and disconnect the ground wire terminal from the battery (spanner 10). Drain the coolant in accordance with the requirements of Section 3, TI...
Place the vehicle in the work area. Open the hood and disconnect the ground wire terminal from the battery (spanner 10). Drain the coolant in accordance with the requirements of Section 3, TI...
Elements of the heating, ventilation and air conditioning system
Fan of the heating, ventilation and air conditioning system unit The heating, ventilation and air conditioning fan is located in the heating and air conditioning ventilation unit housing on the right...
Fan of the heating, ventilation and air conditioning system unit The heating, ventilation and air conditioning fan is located in the heating and air conditioning ventilation unit housing on the right...
This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian
More sections with information from manuals for Lada:
• Body and interior: Interior (internal elements) Lada Kalina Sedan (2004-2013, VAZ-1118)
• Body and interior: Interior (internal elements) Lada Granta 1 (2011-2023, VAZ-2190)
• Body and interior: Interior (internal elements) Lada Priora 1 (2007-2018, VAZ-2170)
• Body and interior: Interior (internal elements) Lada Largus 1 (2012-2023)
Link to this section in various formats
TEXTHTMLBB Code
- General information
- User manual
- Maintenance
- Daily care
- Troubleshooting
- Power unit
- Engine repair
- Fuel system
- Cooling system
- Repair H4M engine
- Transmission
- Clutch and drive shafts
- Transmission
- Chassis (running gear)
- Front suspension
- Rear suspension
- Brake system
- Steering
- Body and interior
- Exterior (external elements)
- Interior (internal elements)
- Electrical equipment
- Equipment and devices
- Lighting and signaling