Place the vehicle in the work area, open the right front door.
Remove cover 2, Figure 11-1, of the filter element by squeezing the fasteners 3 and pulling them.
Figure 11-1 - Cabin filter: 1 - heating, air conditioning and ventilation system unit; 2 - filter element cover; 3 - filter element cover fasteners
Grasp the lower edge of the filter element 2, Figure 11-2, pull it and with a slight downward movement remove the filter element from the housing 1 of the heating, air conditioning and ventilation system unit.
Figure 11-2 - Replacing the filter element: 1 - heating, air conditioning and ventilation system unit; 2 - filter element
Installation is carried out in the reverse order of removal.
Present the vehicle to the Quality Control Department. The Quality Control Department will check the vehicle for compliance with the requirements of TU 017200-254-0023934 in the scope of work performed.