You will need a flat-head screwdriver and a Phillips-head screwdriver.

1. Open the hood and remove the rubber seal.

2. Carefully pry up the three plastic plugs with a screwdriver…

3. …and take them off.

4. Remove the three screws securing the right windshield frame trim…

5. …and three screws securing the right engine compartment trim.

6. Remove the right windshield frame trim.

7. Remove the four screws securing the filter cover…

8. …and remove the lid.

9. Remove the filter from the air intake housing.
10. Install the new filter in the reverse order of removal.
