Navigation route guidance (XRAY 1)

Activating Instructions

Press 2 or wait 10 seconds after entering your destination. Management begins.

Note: You can interact with the map at any time by moving it in the desired direction or by tapping the screen.

Control screens

The system offers various navigation maps.

Press 3 to change the map display mode and open the drop-down menu. Then choose from the different display modes:

• 2D;
• 3D;
• 2D North

You can also change the map display mode by clicking the compass arrow 1 on the map.

Full screen mode (2D, 3D or 2D North)

Map of intersections







This mode allows you to display the navigation map image on the screen.

Information on arrival time and remaining distance to destination is provided in Section 5.

The nearest change of direction sign is shown in Section 4.

Alternative route

The system offers you an alternative route in the event of a traffic accident or heavy traffic on your route. Click "Yes" or "No" to select.

Brief information about the traffic situation

Type of highway connection

While navigating along the route, you can get information about the traffic situation at any time by pressing 6.

The screen displays various events on your route. The system will indicate to you the delay time that will be caused by incidents on your route. Press 8 to change event display options. Press 10 to make a detour, 9 to access traffic situation options (see chapter "Navigation system settings") or 7 to return to navigation.

Note: Traffic information depends on your subscription to this service and the level of the received signal.

In route guidance mode, before each motorway junction, the system displays the junction in 3D.

Note: Some connections only display a pointer arrow.

The system returns to normal display mode after the connection is completed.

Selecting the language for voice guidance

Press "Main Menu" → "Navigation" → "Options" → "Settings" to change the voice guidance language. Select a language from the list by pressing button 12. Select the desired language, then confirm your selection by pressing button 11. To set the sound settings for voice guidance, see. the "Sound settings" section of the "Adjusting the sound" chapter.

Listening to the radio in voice guidance mode

When listening to the radio in voice guidance mode, the system will temporarily mute the radio before each direction change announcement before passing an intersection.





You can go to the radio station listening screen during navigation by pressing 13. To return to the navigation screen, press 14. To return to the "Main Menu", press and hold 14 for about 3 seconds.

Detailed route information

This feature allows you to display your route.

Press "Main Menu" → "Navigation" → "Route" after entering your destination.

There are six options to choose from:

• "Change route";
• "Avoid";
• "Review";
• "Cancel route";
• "Alternative routes";
• "Route"

Route overview

Tap "Main Menu" → "Navigation" → "Route" → "Overview" to get a map with an overview of the active route.

The following information appears:

• name and/or address of destination;
• total travel time;
• total length of the route;
• special points and route sections (toll booths, toll roads, motorways, etc);
• alternative routes (e.g. "Short", "Fast", "Economical")

Press 15 to display the following options:

• "Warnings";
• "Route settings";
• "Map settings";
• "Voice settings";
• "Coordinate format";
• "GPS";
• "My Updates";
• "Movement"

Note: More detailed information is provided on the next page.

Simulation of navigation

This feature allows you to simulate the journey you will take to your destination.

• Press button 18 to start or interrupt the simulation
• Press 20 to increase the simulation speed
• You can exit the route simulation mode at any time by pressing button 16
• You can go to the previous/next action by pressing buttons 17 or 19

Road sections and destination

Press "Main Menu" → "Navigation" → "Route" → "Edit Route" to change the route by adding, changing or canceling road sections.





Press 21 to add sections, then 25 to add a new destination. There are different ways to specify a destination: see the section "Entering a destination".

• Press 23 to cancel the destination
• Press 24 to rearrange the list
• Press 22 to change the route departure address

Detours

Press "Main Menu" → "Navigation" → "Route" → "Avoid" to detour.

Click on any zone from the list depending on the required detour.

To change the zone, press 27. Confirm the new route by pressing 26.

Route cancellation

You can stop the current control at any time. Press "Main Menu" → "Navigation" → "Route" → "Cancel Route" to cancel the current route.

Alternative routes

In this section you can change the route planning method. There are three modes that allow you to change the way your route is planned:

• "Fast";
• "Economical";
• "Short"

See the "Route Parameter Settings" section in the "Navigation Settings" chapter.

Press "Main Menu" → "Navigation" → "Route" → "Alternative Routes", then A, B or C to confirm the new route.

Press button 28 to return to the previous screen.

Route

• information and warnings: names of road sections entered by the driver, restrictions (approach and maneuvering), ignored user settings, etc.;
• in the form of a list of roads;

Displays the route in detail, taking into account the names and numbers of roads.

It also displays their length, average direction and travel time. In this mode, path elements are not displayed.

Route settings

This section allows you to select route parameters. See the "Route Settings" section in Chapter "Navigation system settings".

This function allows you to display the waybill. At the same time, many details of the trip become visible:

• arrows indicating a change in direction of movement;
• road number;
• distance to branch
Press 29 to sort route details:
• in the form of a brief description
Displays only the main route elements (starting point, destination), total distance, remaining time and arrival time;
• in the standard description

Displays all maneuvers and details of road signs, road numbers, street names and distance.