1. Remove the corresponding wheel.
2. Key «on 10» unscrew the brake pipe from the hose, holding the second wrench «at 15» hose tip. At «souring» tube nuts, cut the hose and unscrew the hose tip from the tube.
3. Remove the hose tip from the bracket on the body.
4. Take out a sealant of a brake hose from an arm on a rack.
5. Key «at 15» unscrew the hose end from the wheel cylinder..
6.... and remove the brake hose.
Note. Please note that a copper sealing ring is installed on the tip of the brake hose. Replace the ring when installing the hose.
7. Install the new hose in the reverse order of removal. Make sure it doesn't twist. A colored stripe is applied along the hose for control.
8. Bleed the hydraulic drive of the brake system (see «Bleeding the hydraulic drive of the brake system»).