1. Unscrew the button from the lever.
2. Remove the pawl spring. Replace the defective spring.
1. Unscrew the button from the lever.
2. Remove the pawl spring. Replace the defective spring.
Replacing the spring of the parking brake lever pawl (Priora 2170)
If the parking brake lever does not lock in the selected position, first check the pawl spring. If the spring is good, replace the lever.
1. Unscrew the button from the lever.
2. Remove the pawl spring. Replace the defective spring.
1. Unscrew the button from the lever.
2. Remove the pawl spring. Replace the defective spring.
This article is available at russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian
This article has been reviewed: Vladislav Voloshin
More articles with information from manuals for Lada:
• Replacing the Parking Brake Indicator Lamp Switch Lada Kalina Sedan (2004-2013, VAZ-1118)
• Parking brake — checking the lever travel Lada Granta 1 (2011-2023, VAZ-2190)
• Parking brake Lada Vesta 1 (2015-2023, VAZ-2180)
• Replacing brake fluid Lada Largus 1 (2012-2023)
• Bleeding the hydraulic brake system, replacing the fluid Lada X-Ray 1 (2015-2022)
Link to this article in various formats
Reviews and comments of visitors
No comments yet
- General information
- Vehicle device
- User manual
- Faults en route
- Maintenance
- Power unit
- Engine repair
- Cooling and lubrication system
- Supply system
- Exhaust system
- Transmission
- Clutch
- Car gearbox
- Drive shafts
- Chassis (running gear)
- Car suspension
- Steering
- Brake system
- Body and interior
- Exterior (external elements)
- Interior (internal elements)
- Doors, locks and windows
- Electrical equipment
- Equipment and devices
- Power devices
- Lighting and signaling
- Cooling and heating
- Electrical circuits