Replacing the rear brake hoses (Priora 2170)

You will need: a special 10 mm wrench for unscrewing the brake pipe nuts, and a 15 mm wrench.

1. Place the vehicle on a lift or inspection pit.



2. Using a 10 mm wrench, unscrew the brake pipe coming from the brake force regulator from the hose, holding the end of the hose with a 15 mm wrench.



3. Remove the hose tip from the bracket on the body.



4. Using a 10 mm wrench, unscrew the brake pipe from the hose that goes to the rear wheel brake mechanism, holding the end of the hose with a 15 mm wrench.





5. Remove the hose end from the bracket on the rear suspension beam and remove the brake hose.



6. Install the new hose in the reverse order of removal. Make sure it doesn't get twisted.

[Source link - website: LadaMan.ru]

7. Bleed the hydraulic brake system (see "Bleeding the hydraulic brake system").