Removing
1. We prepare the car for work (see «Preparing the car for maintenance and repair»).
2. Remove the washer reservoir (see below, «Windshield washer reservoir - removal and installation»).
3. Drain the non-freezing liquid from the tank into the container through the filler neck. Disconnect the hose from the electric pump and remove the tank.
4. Remove the fitting of the electric pump from the tank and remove it.
5. Remove the sealing rubber sleeve from the tank.
6. We inspect the clutch, if cracks and other damage are found on it, we replace the clutch.
Installation
7. Install the pump in reverse order. After assembly, fill the tank with windshield washer fluid.