Removal and installation the starter (Priora 2170)

You will need: open-end wrenches "13", "15".

1. Disconnect the wire from the negative terminal of the battery.

2. Remove the air filter (see "Removing and installing the air filter").



3. Unscrew the terminal fastening nut...



4. ...and disconnect the wire with the terminal from the contact bolt of the traction relay.



5. Disconnect the wire from the traction relay terminal.





[The material was taken from a website www.Ladaman.ru]

6. Unscrew the nut of the upper mounting stud...



7. ...then the nut of the lower starter mounting stud...



8. ...and remove the starter from the car.

9. Install the starter in the reverse order of removal.