1. Disconnect the wire from the terminal «minus» battery.
2. Remove the mounting block cover (see «Replacing fuses and relays in the mounting block»).
3. Remove the screw that secures the mounting block to the instrument panel...
4.... and remove the mounting block from the instrument panel, disengaging it from the mounting hooks.
5. Remove all relays and fuses from the mounting block (see «Replacing fuses and relays in the mounting block»).
Fuse body color and rating
6. Wring out the clamps of the electrical wiring terminals...
7.... remove the terminals with wires from the mounting block and remove the mounting block from the car.
Note. Mark the wires removed from the mounting block to install them in the new mounting block in their original places.
Note. The mounting block is supplied as a spare part together with the instrument panel wiring harness.
8. Install the mounting block in the reverse order of removal.