1. Disconnect the wire from the negative terminal of the battery.
2. Set the steering wheel to a position corresponding to the straight-ahead movement of the vehicle.
3. Remove the two airbag mounting screws…
4. …turn the pillow…
5. …by prying off the green retainer of the control wire block…
6. …move the retainer to the side…
7. …and, having disconnected the wiring block, remove the airbag.
8. Press the lock of the wiring harness connector…
9. …and disconnect the horn wire connector.
10. Use a colored marker to mark the position of the steering wheel relative to the steering shaft.
11. Loosen the tightening (without turning away completely) steering wheel mounting nuts on the shaft…
12. …knock the steering wheel off the shaft with sharp blows of your hands…
13. …and, having finally unscrewed the mounting nut, remove the steering wheel from the car.
14. Install the steering wheel in the reverse order, observing the location of the marks on the steering wheel relative to the shaft.