Checking the gap between the rack stop and the stop nut (Priora 2170)

1. Remove the steering gear from the vehicle (see "Removal and installation of the steering gear").

2. Set the rack to the middle position, which is determined by the size (87±0.25) mm from the gear axis to the end of the rack. Using a special device, load the rack with a force of P = (500±20) N, or (51±2) kgf, at a distance of 84 mm from the gear axis in the direction of the rack stop.

3. The maximum permissible gap between the stop and the nut is 0.2 mm. The maximum permissible movement X of the rack, measured through the relative movement of the pressing punch 1, should not exceed 0.16 mm.