Note: Replace mudguards that do not cover the entire wheel well with those that will completely protect the well from dirt.
You will need: 7 and 10 mm wrenches, a TORX T30 wrench, and a Phillips-head screwdriver.
1. Remove the appropriate wheel.
2. Using a TORX T30 key, remove two bolts and using a screwdriver, remove one screw securing the engine mudguard…
3. …and remove the shield.
4. Using a 7 mm spanner, unscrew the screw securing the front wing fairing to the sill.
5. Using a 7 mm spanner, unscrew one screw securing the front fender fairing to the mudguard liner and the fender, and using a 10 mm spanner, unscrew the two nuts securing it to the body…
6. …and remove the fairing.
7. Use a 10 mm spanner to loosen the nut and use a screwdriver to remove the mudguard liner mounting screw…
8. …and remove the fender liner.
9. Remove the three screws securing the wing guard to the bumper.
10. Unscrew the nut securing the casing to the body bracket and the screw securing it to the bumper…
11. …and remove the wing protective cover.
12. Install the removed parts in the reverse order of removal.
When installing the removed parts, check that all spring nuts are present on the wing housing…
…and on the fender liner.