Warning! There are many electronic components in the engine compartment, therefore we do not recommend cleaning the engine compartment with high-pressure cleaners (as most car washes do).
To perform the work you will need a special engine cleaner. This product contains highly effective detergents that quickly penetrate through the layer of burnt oil dirt and dissolve it in the most inaccessible places without additional mechanical action.
Sequence of execution
1. Prepare the vehicle for maintenance (see "Preparing the car for maintenance and repair").
2. After opening the hood, apply a special cleaner to the parts in the engine compartment.
3. Wait a few minutes (see instructions for use of the drug) and wash off the softened dirt. If necessary, apply additional product and clean the surfaces with a brush with hard bristles.
4. Wipe the parts dry with a clean cloth.
5. Blow with compressed air (from a compressor or foot pump) engine and engine compartment to remove any remaining moisture.
Recommendations. To protect engine parts from contamination and give them an attractive appearance, you can treat the engine compartment with thermal varnish for the engine. Before use, read the instructions for use of the drug. After washing, spray drive belt care product onto pulleys and accessory drive belt. To ensure that the product is evenly distributed over the belt surface, start the engine and let it run for a few minutes.