1. Disconnect the wire from the negative terminal of the battery.
2. Disconnect the rear wiring harness connector and the additional brake light wires, and then push the wiring harness into the hole in the luggage compartment shelf.
3. Remove the two screws securing the additional brake light trim…
4. …and remove the trim assembly with the brake light.
(Original text can be found on the website www.ladaman.ru)
5. Remove the two screws securing the additional brake light to its trim…
6. …and remove the additional brake light.
Note: The additional brake light is assembled with LEDs, so if they burn out, it must be replaced. Pay attention to the marking of the additional brake light to purchase exactly the same one.
7. Install the additional brake light in the reverse order of removal.