To prevent damage to the plastic diffusers when washing, do not use aggressive or abrasive cleaners or chemical thinners.
To avoid turbidity and scratches, never wipe dried dirt from the outer surface of the lenses, pre-wet the surface of the lens with plenty of water, use a soft rag or sponge for cleaning, do not use sharp objects to clean the lenses from frost.
Warning! Excessive contamination of the headlamp lens (over 75%) significantly worsens the illumination of the roadway and reduces the safety of driving a car. Keep the outer surface of the plastic lens of the headlight unit clean to prevent critical temperatures inside the headlight unit and to avoid melting when the high beam is on.
Warning! Premature clouding of headlight lenses leads to poor illumination of the roadway, distortion of the cut-off line and blinding drivers of oncoming vehicles.
In very humid hot or cold air conditions, such as heavy rain, when washing the vehicle, condensation may form on the inside surfaces of the lenses of lighting and signaling devices for a short time. No special measures are required for the disappearance of condensate. The disappearance of condensate should occur during the operation of the car, and to speed up the process, it is necessary to turn on the appropriate lighting devices.