Removing
1. We prepare the car for work and disconnect the wire terminal from the negative terminal of the battery («Preparing the car for maintenance and repair»).
2. Having released the lever for adjusting the position of the steering column, we shift the steering wheel as far down as possible.
3. Remove the instrument panel trim («Mounting block - replacing fuses and relays»).
4. Using a short Phillips screwdriver, unscrew the two screws of the upper fastening of the instrument panel lining...
... and one for the bottom mount.
5. Overcoming the resistance of two spring clips (they are put on the lower protrusions of the lining), we take out facing from an aperture of the panel of devices.
6. Turn off the four screws securing the instrument panel.
7. We remove the shield from the instrument panel and release the retainer of the connecting block.
8. Disconnect the connecting block of wires from the instrument panel.
9. Remove and remove the instrument panel.
Installation
Install the instrument panel in reverse order.