Removing
Place the car on the workplace, brake with the parking brake, turn off the ignition. Raise the hood, disconnect the wire terminal "masses" from battery (wrench "on 10").
Remove decorative trims 1 and 4, Figure 5-1, overcoming the force of the latches.
Figure 5-1 - Removing the instrument cluster visor: 1 - left overlay; 2 - screw for fastening the visor of the instrument cluster; 3 - visor of the instrument cluster; 4 - right pad
Unscrew two screws 2 fastening the visor of the instrument cluster and remove the visor 3, overcoming the force of the clamps (replaceable nozzle Torx T20, screwdriver).
Remove four screws 1, Figure 5-2, fastening the instrument cluster and remove the instrument cluster from the instrument panel (replaceable nozzle Torx T20, screwdriver).
Figure 5-2 - Removing the instrument cluster: 1 - screw for fastening the instrument cluster; 2 - instrument cluster
Disconnect the two terminals 1, Figure 5-3, of the instrument panel harness from the instrument cluster 2.
Figure 5-3 - Disconnecting the wiring harness blocks: 1 - block of the wiring harness of the instrument panel; 2 - instrument cluster
Installation
Install the instrument panel combination in the reverse order of removal.