Removal
1. Prepare the car for work ("Preparing the car for maintenance and repair").
2. Using two 17 mm wrenches, unscrew the nut securing the stabilizer bar to the wishbone.
3. Using a punch of a suitable diameter, knock the bolt out of the rack and lever.
[Data obtained from the website www.Ladaman.ru]
4. Lubricate the end of the stabilizer bar with soapy water.
5. Insert the punch into the hole of the lower silent block. using it as a lever, we turn the rack from side to side, gradually moving it towards the edge of the bar.
6. Remove the rack from the barbell.
Similarly, we remove the stand from the other end of the stabilizer bar.
Installation
We install the struts in the reverse order, having previously lubricated the ends of the stabilizer bar with a soap solution.