Removal
1. Prepare the car for work (see "Preparing the car for maintenance and repair").
Note: It is more convenient to perform the work on an inspection ditch or overpass.
2. Disconnect the front wheel arch liner from the bumper (see "Front bumper - removal and installation").
3. Bend back the mudguard. By pressing the lock, we disconnect the wiring harness block from the fog light.
4. Using a TORX T30 key, unscrew the two mounting screws.
5. Remove the lamp from the bumper cover...
...and we take it off.
6. Install the fog light and parts in reverse order.