1. Remove the top lining of the floor tunnel (see «Removal and installation of floor tunnel linings»).
2. Remove the cigarette lighter and, having pressed the lock of its housing..
3.... remove the housing from the light filter.
4. Press the filter latch..
5.... and remove the light filter assembly with the backlight lamp holder from the upper lining of the floor tunnel.
6. To replace the cigarette lighter backlight, remove the reflector..
7.... lamp holder..
8.... and remove the backlight from the filter cartridge.
9. Install the lamp in the reverse order of removal.
Note. This is what the cigarette lighter assembly looks like.
10. Install the cigarette lighter and all removed parts in the reverse order of removal.