Table 9.2.1. Basic data for monitoring, adjustment and maintenance
| Transmission oil (aPI group) | GL-4 or GL-4/5 |
| Recommended SAE transmission oil viscosity grade: | |
| -40°C - +35°C | 75W80, 75W85 |
| -40°C - +45°C | 75W90 |
| -26°C - +35°C | 80W85 |
| -26°C - +45°C | 80W90 |
| Filling volume, l | 3,1 |
| Dimensions of drive seals (right* - 2110-2301034, 2110-2301034-01; left* - 2110-2301035, 2110-2301035-01), mm: | |
| outer diameter | 57 |
| internal diameter | 35 |
| width | 9 |
| Dimensions of the primary shaft seal (2110-1701043), mm: | |
| outer diameter | 45 |
| internal diameter | 25 |
| width | 9 |
| Gear Selector Rod Seal Dimensions (2108-1703042-01), mm: | |
| outer diameter | 30 |
| internal diameter | 16 |
| width | 7 |
* The seals of the left and right drives are not interchangeable, as they have different directions of the oil drain grooves.
Table 9.2.2. Tightening torques for threaded connections
[Article copied from this portal: LADAman.ru]